USP201E-POE

PoE Surge Protector 10/100

CERTIFICATION
   

Product: PoE Surge Protector 10/100
Model: USP201E-POE
Description: This protector is based on the IEC61643-21:2000 standard, integrated with surge protection for both network signal and power together. It features multi-level protection, large maximum discharge current, low limiting voltage, quick reacting time, low inserting loss etc..It is adapted to HD IP camera data signal and power’s over voltage protection, exempt from the damage caused by reacting over-voltage, operating over-voltage and static electricity discharge etc..It can be widely used in security surveillance, environment surveillance etc.


Features:

1.Standard: IEC61643-21:2000;
2.Protection: PoE and PoE+;
3.Function: Multi function&multi-level over voltage protection, large capacity discharge current, low limiting voltage, quick reacting time, low inserting loss;
4.Grounding mode: Extending Line to ground;
5.Outlook design: Clear mark, easily recognized, aluminum shell, delicate size, simple installation.

Specification:

Item

Description

Network

Rated Working voltage

5V

Maximum Continuous working voltage

6V

Nominal Discharge Current (8/20us)

3KA

Maximum Discharge Current (8/20us)

10KA

Limiting Voltage Between Lines (10/700us)

Core wire to Core wire

≤25V

Core wire to Earth

≤500V

Insulation Resistance

≥0.4MΩ

Insertion Loss

≤0.9dB

Bandwidth

(0.3-100) M

Transmission Rate

100Mbps

Reacting Time

≤1ns

Protective Lines

1/2.3/6

Power

Rated Working Voltage

48V

Maximum Continuous Working Voltage

60V

Load Current

250mA

Nominal Discharge Current (8/20us)

5KA

Maximum Discharge Current (8/20us)

10KA

Limiting Voltage (8/20us)

250V

Reacting Time

≤1ns

Environmental

Working Temperature

0℃~55℃

Storage Temperature

-20℃~70℃

Humidity (non-condensing)

0~95%

Mechanical

Net weight

157g

Dimension

105mm×52mm×28mm (include interface length)

Material

Aluminum

Stability

MTBF

>30000h

Connection:

Application:

Installation:

1) Please turn off the power before installation, power on may damage the device and make sure the network connection is reliable;
2) Use a network cable with crystal connector to connect the surge protector's network input and monitor, and use another network cable to connect the surge protector and IP camera
3) Make sure the connection is reliable, power on the device.

Accessories:

1. PoE surge protector         1 pc
2. User manual                    1 pc
3. Hangers                           1 pair